INNOVA CS-HB140 Manual Horizontal Boring & Milling Machine

CAPACITY
Table travel (X axis) 1,400 mm (55-3/32 inch)
Head travel ( Y axis) 1,200 mm (47-3/16 inch)
Table travel (Z axis) 1,100 mm (43-1/4 inch)
W axis (Spindle axial) -
Spindle center to table top 0 ~ 1,200 mm (0 ~ 47- 3/16 inch)
Spindle end to table center 255 ~ 1,355 mm (10 ~ 53-1/4 inch)

TABLE
Table size overall 1,100 x 800 mm (43-1/4 x 31-1/2 inch)
T slot (Wide x No. x Pitch) 20 x 7 x 100 mm (0.78 x 7 x 3-7/8 inch)
Table indexing (360 degree) -
Table load capacity max. 1,400 kg (3,090 lbs)

SPINDLE HEAD
Spindle nose ISO R297 No.50
Spindle diameter -
Spindle speed
- 50Hz; 12 steps, 35 ~ 1,250 rpm
- 60Hz; 12 steps , 45 ~ 1,500 (opt. 30 ~ 1000) rpm
X, Y, Z rapid
- 50Hz mm/min, 2,400 (94-7/16 ipm)
-60Hz mm/min, 2,880 (113-3/8 ipm)
W rapid mm/min -
X, Y, Z auto feed
- 50Hz mm/min, 23 ~ 730 (15/16~28-3/4 ipm)
- 60Hz mm/min, 28 ~ 875 (1-1/8 ~ 34-7/16 ipm)
W feed mm/min -
Change of feeds -
Z axis boring feeds (12 steps) mm/rev 0.028 ~ 0.875

MOTORS
Spindle motor AC 7.5 kW (10HP)-4P
Feed motor AC 1.5 kW (2HP)-4P
Feed motor for X, Y, Z axis (Servo) -
Feed motor for W axis (Servo) -
Lube pump for headstock AC0.18-4P kW
Lube pump for slideways AC3.5 W
Coolant pump AC 0.12 kW (1/6HP)-2P
Hydraulic pump for axis clamp AC 1.5 kW(2HP)-4P

MACHINE SIZE
Machine height 2,800 mm (110 inch)
Floor space (Longitudinal x cross) 3,606 x 3,600 mm (142 x 141-3/4 inch)
Net weight (Approx.) 8,400 kg (18,520 lbs)
Standard color Gray